samsung remote not working with cable box

The remote will then control the cable box. 1 Make sure that the second remote is in the TV mode.

Simple Ways To Program A Samsung Remote To Work With A Cable Box

Be sure to replace them with high-quality batteries to ensure optimal function.

. Xg1-v4A Box and new Samsung Qseries not working. Make sure your Smart Remote is paired with the TV I got a new remote that had to be paired first. If the voice control on your remote is working you can simply say Restart TV Box to force the box to restart.

Why wont my TV recognize my cable box. 1st problem is Samsung new remote does not connect with this Xfinity box unless you get 2 right in front of box. Newer Samsung TV remotes may only have a Mode button.

Make sure STB is connected and fully functional. My Cable remote works fine. Tv wont switch on in 4K 8K and Other TVs 09-27-2021.

Then try controlling the TV again by pointing the remote directly at the Samsung logo. If the remote still will not work visit our Support Center to request service. To eliminate the possibility that the remote is sending commands to the TV take the batteries out.

The TV in the bedroom is working fine. Most Xfinity boxes come with a physical reset button that you need to hold down for 5 seconds. Completed the setup everything working again.

If the TV has another remote that is known to work on this TV you can test that remote on the TV. 2 Unplug the TV. Find more about Universal Remote Setup.

2014 Smart LED TV with Samsung Support. I have cablevision coaxial cable from the wall to the cable box HDMI cable from the cable box to the Samsung. Select New Device -- Cable or Sat Box -- TV.

Moved my cable box under my TV. The remote is URC-8820-MOTO with a Motorola HD DVR box. Nothing solves the problem.

3 Clean the touch controls. On Samsung TV go to Source -- Universal Remote. Two problems I have Samsungs lastest Q series 65 TVs.

Then wait for a few minutes to turn it back on. The tv will try to find HDMI1 connection automatically. Tv remote only turns tv on red light keeps flashing in 4K 8K and Other TVs 10-15-2021.

Smart Remote Not Working in 4K 8K and Other TVs 11-25-2021. Delete the universal remote for Spectrum and re-configuring. To test a second remote on the TV follow these steps.

When tv is on we can see one cable channel but have no way to use the Samsung remote to change channels or see tv guide. If the light does not flash this means that the batteries need to be replaced. Ensure your television set is turned on and click Mode repeatedly until the Cable setting is highlighted in the onscreen menu.

If the above test indicated that remote is not working you have a defective remote. With the TV powered on unplug the TV from the wall outlet. This is RF remote like the Xfinity remote and should work box.

We have also hooked another TV up in the den to the new box it. If your Samsung remote has a Cable button click it to let the remote know that you are trying to communicate with a cable box. 4- connect power to Spectrum cable box so it restart make sure it is on 5- connect the cable on HDMI1 slot back.

You can check by seeing if this button lights up when you press buttons on the remote. I was already in touch with Samsung customer service and tech and tried all the step they asked but no luck. Test Another Remote on this TV.

6- turn on tv using the Samsung remote. I have tried to do the SWAP B. Update tv software 3.

Reboot the TV and the Cable Box The next thing you can try is to reboot the cable box. For some reason the remote stopped working with the cable box. Resetting my cable box unplugging the HDMI cable and turn is back on.

Now the cable box is not responding to the remote. I even had Samsung send new remote and still nothing. To do this either use your remote or the power button on the box itself.

It still turns the TV on and off. Is there another fix I should try. Reset everything I can think of.

Maybe the communication from the cable boxremoteSamsung got disrupted somehow I dont know but doing a re-setup worked for me. It has to be a genuine Samsung remote that when holding the Back and Play buttons shows on TV and pairing is successful. 7- you need to confirm with the menu that channel-up and channel-down is working.

2 hours on the phone going through all of the troubleshooting steps that were provided however these did not fix the problem. Turn off your TV and wait for a few minutes to turn it back on as well. It has to be a genuine Samsung remote that when holding the Back and Play buttons shows on TV and pairing is successful.

I reached out to Samsung and spent approx. Unplugged the box and rebooted and nothing is working. Purchased my tv in Novemeber of 2020 and the remote was working fine until 12121.

Weve also tried all troubleshooting we can find on the tv itself. Make sure AnyConnect is ticked in tv settings 4. If the TV has a One Connect box unplug it as well.

The icon that was previously there that allowed us to access the guide and channels using the Samsung remote has disappeared. If your remote is not a Smart Remote and you see the IR light turn on your TV using the control on the TV directly. Reseting my remote.

Remote Control is temperamental- And sometimes will not work unless you reboot tv in 4K 8K and Other TVs Sunday. The Samsung that used to work has failed. Unplugged TV and cable box for a while 2.

How to Video for Samsung Television. Make sure STB is connected and fully functional. We see nothing wrong with the cable coming to the den.

On Samsung TV go to Source -- Universal Remote. Make sure you have pressed the CBL button at the top right of the remote. We unhooked things and then hooked them back up.

On this cable line is a splitter in the basement which the other cable goes to the bedroom. Software issues with the cable box can cause the Xfinity remote to stop working. The cable in the DEN is run from the attic to basement and up through the floor not a jack.

1 Remove the batteries from your remote control. If your Samsung TV Xfinity remote is not working press and hold any button on the remote control and see if the LED light flashes on it. We just moved our cable box from side of the room to the other.

Yy3s1fblh4ftkm